-
×
RAINPOINT Easy-Setup Automatic Plant Waterer Indoor for Pot Plant Adjustable Water Output,Battery Powered Outdoor IP54 Waterproof Drip Irrigation System Device Kit Beginner-Friendly Water 10-15 Plants
$71,00 -
×
Plant Watering Devices Self Spike Planter Drip, Vacation Watering System for Indoor and Outdoor Pots, 10 PCS Set
$57,00 -
×
100FT Drip Irrigation System for Garden, 2026 Upgraded DIY Automatic Plant Watering Kit with Push-Fit Connectors, 30 Water-Saving Adjustable Drip Emitters for Yard, Lawn & Greenhouse
$201,00 -
×
280 Pcs Barbed Connectors Irrigation Fittings Kit,Drip Irrigation Barbed Connectors 1/4''Tubing Fittings Kit for Flower Pot Garden Lawn(Straight Barbs,Single Barbs,Tees,Elbows,End Plug,4-Way Coupling)
$46,00 -
×
256FT Drip Irrigation System Kit, 163PCS Automatic Garden Watering Misting System with 1/4" Distribution & 1/2" Hose Tubing and Accessories for Greenhouse, Yard, Lawn, Plant
$330,00 -
×
Automatic Watering Drip Irrigation Kit for 20 Plants with Dual Digital Programmable Water Timer, Indoor Automatic Watering System for Houseplants
$190,00 -
×
Rain Bird DRIPKITBAG Drip Irrigation Repair and Expansion Kit
$290,00 -
×
60 Piece of Drip Irrigation Emitters 360 Degree and Professional Irrigation Drippers and Drip Emitters or Sprinkler System Parts and Heads for 1/4 inch Drip Tubing
$46,00 -
×
98FT Drip Irrigation System, Micro Garden Drip Irrigation System with 1/4 inch Tubing & Adjustable Misting Nozzle Sprinkler, Automatic Watering System for Greenhouse, Yard, Lawn, Plant
$129,00 -
×
100FT 360° Adjustable Drip Irrigation Kit – 1/4" Tubing with 18 Nozzles, Full-Circle Spray for Greenhouse, Vegetable Garden & Potted Plants, Water-Saving DIY Irrigation System
$71,00
Product description
Solar Powered Automatic Drip Irrigation Kit-Manufacturer：Marvel Technology CO.,LTD
JIYANG Solar Drip Irrigation Kits Supported 30 Pots, 12Timing Modes for Plants
It's powered by solar energy, can take water directly from containers such as buckets, without the need for a tap. It can automatically water your plants at preset time intervals and amounts, and will automatically alarm when the water pump is idling or water shortage in the container. A perfet designed for balconies, patios, small gardens without faucet and fixed power supply.
Features
1. Designed for balconies, patios, small gardens without faucet and fixed power supply.
2. Powered by solar energy, no need for additional wiring.
3. Taking water directly from containers such as buckets, without the need for a tap.
4. Auto watering at preset volume and time interval.
5. Audible alarm indicator for water shortage in the container.
6. Water tubing, T-Joint and Drip-Stakes are provided. You can layout as you need.
TIP–Hot water will soften end of water tube enough to fit over T-Joint barb and tighten as it cools.
Lightly soap end of selected T-Joint
Dip tube end in hot water 10 -15 seconds. Dry tube end and fingers. Use repeated pushing movements to fit warmed tube end completely over T-Joint barb.
What's the best MODE for my plants?
Press the MODE to select the watering frequency. The blue indicator light shows from left to right one by one according to your press. For the first light, it will water once per 12 hours for 5 minutes. Press the MODE again, the light will jump into the light 2, the system will re-time and will water as it selected. The watering flow is about 600ml/min. There is 20 meter of Water Pipe with20 Drippers as the standard accessories. Please select the number of drippers and the watering frequency according to your actual water demand of plants. It's very easy for you to DIY your own home automatic watering irrigation kit.
PACKING LIST
Solar Controller 1
Water Level Sensor 1
Water Filter 1
Tubing 10m 2
T-Joint 20
Drip-Stake 20
Ground Stake 1
Screw 2
Anti-Siphoning Device 1
Manual 1
Solar Pump dispenses approximately 600ml per minute. A 5- minute cycle will dispense about 0.8gal or 3 liters of water divided among the plant Drip-Stakes
HOW TO INSTALL （You can put the Pipes into hot water for minutes, it does good help and make it easier to connect from drippers and the tees to the pipes.）
1. Solar Automatic Drip Irrigation Kit
ASSEMBLE SUPPLIES
· Water Tubing
· T-Joint
· Cup of hot water
· Soap
· Scissors
· Towel
2. Cut the Tubing into the Length as You Need
2-1). Arrange plants at desired positions.
2-2). Lay Main Line tubing in front of plants
2-3). Mark plant positions on Main Line water tube section (tape or bread ties)
2-4). Cut tubing with scissors at plant location
3. Connect the Tubing to the Water Inlet and Put the Water Filter into the water
*Be certain your plant containers / trays are LARGE ENOUGH to contain the programmed volume of water and water spillover will not cause damage to surroundings.
*Solar Pump dispenses approximately 8oz or 600ml per minute. A 5- minute cycle will dispense about 0.8gal or 3 liters of water divided among the plant Drip-Stakes.
*Audible alarm indicator when the water pump or the filter is blocked.
4. Connect anoter Tubing to the Water Outlet
TIP*- Hot water will soften end of water tube enough to fit over T-Joint barb and tighten as it cools.
Lightly soap end of selected T-Joint
Dip tube end in hot water 10 -15 seconds. Dry tube end and fingers. Use repeated pushing movements to fit warmed tube end completely over T-Joint barb.
5. T-Joint to Tubing/Access to Drip-Stake
5-1). Insert * T-Joints into Main Line water tubing at each plant position.
5-2). Arrange short Lateral Lines between water Main Line and plants.
5-3). Install end of Lateral Line onto Main Line T-Joint
5-4). Install Drip-Stake in other end of Lateral Line.
5-5). Insert Drip-Stake into plant
Note: Tube ends must be completely over T-Joint barb
6. Probe Connector/Put Water Sensor Probe into Water Container
*Water Container must be below level of plants
*Water Sensor Probe rests at bottom of water container.
*Audible alarm indicator for water shortage in the container.
7. Fix the Spin into Back of the Solar Controller
Ways of Installation
* Wall instabllation
* Ground plug installation
* Keep on table
8. Plug in the soil, keep on table or hang to the wall
Note:
8-1). Solar Controller must be above plant level and facing sun.
8-2). Solar Controller buttons must face toward the ground when installed.
9. Press ON/OFF and MODE to Select 6 Timer Modes(Light will show from left to right accordingly)
ON/OFF button – Program Start
MODE button – Program Interval & Volume – Blue LED on Solar Controller
Go for a happy long vacation.
It's solar powered, and has the most power on the days water is needed most. It still functions after a few overcast days. 15-20 days duration after full charged. Just prepare a big container of water, select the watering frequency with the number of drippers. Then go for a happy long vacation.
Be the first to review “Solar Automatic Drip Irrigation Kit System, JIYANG Solar Powered Auto Easy DIY Watering Device Supported Pots Plants, 12 Timing Modes with Anti-Siphoning Device (Supported 20-30 Pots, 12Timing Modes)”
You must be logged in to post a review.
Related products
Original price was: $89,00.$71,00Current price is: $71,00.
Original price was: $119,00.$95,00Current price is: $95,00.
Original price was: $30,51.$24,41Current price is: $24,41.
This product has multiple variants. The options may be chosen on the product page
Original price was: $96,84.$77,47Current price is: $77,47.
This product has multiple variants. The options may be chosen on the product page
Original price was: $53,00.$43,00Current price is: $43,00.
Original price was: $23,00.$19,00Current price is: $19,00.
Original price was: $83,97.$67,18Current price is: $67,18.
This product has multiple variants. The options may be chosen on the product page
Reviews
There are no reviews yet.